●
Use the holes(5.0mm) marked '
'. To create the conductive connection (frame is anodized), use
Stainless steel M5nut, two Stainless steel cut washer, Stainless steel M5 plain washer, Stainless steel
M5 spring washer ,
M5
copper wire ,and Stainless steel M5 bolt.
1. Copper wires with M5 cupped washer should be placed through the bolt;
2. Put the cut washer through the bolt, and the bolt must be put through the hole fixed in the aluminum
frame;
3. Use the nut and cut washer to fix all the parts. The copper wire can not be attached to the aluminum.
●
Do not interrupt or influence the conductive connection when making daily maintenance .All the
crunodes on the conductive connection must be fixed. The fastness does not depend on soldering.
5、
Suggested maximum number of modules in parallel and in series
●
When designing the system, we Suggested maximum number of modules in parallel and in
series for [Vsys/(1.25Voc)]/1
、
fuse rating/Isc+1.
