Znonz I, Owner'S Manual

Page: 6 / 11

How to prepare for and perform photography
○
When using with a film camera
〔
Preparation
〕
This product attaches to the camera via the Leica M mount. So it can be
used with the Leica M2, M3, M4, M6, etc. cameras.
It can also be used with other M mount cameras such as the Minolta CL
and CLE, Konica Hexar RF, Zeiss IKON ZM, and Cosina Bessa series.
A viewfinder with a 28 mm field of view is required.
(The Leica M4-P, M6, etc. will automatically display the 28 mm frame when
this unit is attached.)
Note) If your camera does not have a built-in 28 mm viewfinder, you will
need to acquire an external 28 mm viewfinder (sold separately by various
manufacturers).
〔
Photography
〕
Set the exposure mode to A (aperture priority).
•When determining the exposure time manually, the amount of transmitted
light differs depending on the type of optical element selected, so please
refer to the relevant optical element card for the nominal f-number to use.
•If the exposure time is longer than 1/60, use of a tripod is recommended.
•No focus adjustment is required.
16
Handling precautions
○
Please read this section carefully before use.
●
Do not use the product in ways other than those described in this instruction
manual or for any other purpose.
●
The product is not water resistant. Allowing it to get wet could cause it to
malfunction.
●
Do not store or leave the product in a hot and humid environment. Doing
so could cause deformation or malfunction of the product.
●
Do not disassemble the product. It may not be possible to put it back
together.
●
Do not touch the optical element unit. It may cause deformation of the
element or other problems with photography.
●
Never use organic solvents such as thinner or benzene on the unit.
Name of each part
Front
Back
❸
❷
❶
❹
❺
❶
15
❶ Turret dial
Rotate it to select the optical element.
To reveal the next element, rotate it 360 degrees
until the white dot on the turret dial is visible
through the hole in the unit.
Turn the turret dial until it reaches the click stop
position. This is necessary for the optical element
to be correctly positioned on the optical axis.
❷ Display window
The selected optical element is displayed.
(For more information on the features of each
element, refer to the optical element cards that
come with the product.)
❸ Light capture unit
Captures light necessary for photography.
❹ Mount unit
Attaches to the camera / mount adapter.
Compatible with the Leica M mount (28-mm finder
frame)
❺ Option attachment units