ZNH AM-ZNH-05-20, User Manual

Page: 5 / 13

3.1 Electrical System
• Battery: 36 volt lithium-ion (Li-ion) 10 Ah
•
Engine: 36 V, 350 W,brushless
•
Pedal Sensor: speed sensor
•
Top speed: 32 km / h(limited)
• Operating Distance: Up to 38-47 km
4. Parts of the Bicycle
4.1
1. Frame
2. Battery
3. Seat lock lever
4. Brake lever
5. Tyre
6. 36V*350W motor
7. Pedal
8. Headlight
4.2 The saddle and handlebar stem
You may want to adjust the stem and saddle height to the desired height
Please note that the handlebar stem and saddle, however, must not be raised more than the tubes
marked with a safety limit of subscriptions. Failure to follow these instructions may lead to serious
personal injury.
1. Open the stem / saddle lock lever.
2. Adjust the stem / saddle to the desired height. Do not exceed the safety limitindication.
3. Attach the lock lever and make sure that it remains firmly in place.
When you sit on top of the saddle, your heels should just touch the pedal when it is in its lowest position.
When cycling correctly, your knee should be slightly hooked and the pedal will in the lowest position.You can
also adjust the angle of the saddle, loosen the screw below the saddle,then placing the position,and tighten
the screw back in place at the end.
4
1
8
7
5
2
4
3
6
losen screw