Assembly Guide
Guide d’installation
Montageanleitung
Przewodnik montazu
Montagehandleiding
Page: 3 of 3
Disclaimer: This guide is for the installation of components manufactured by ZND only. ZND cannot accept responsibility for the installation if components not supplied by
ZND are used. ZND also recommends that a site specific risk assessment is done prior to any installation using this guide.
Guide Date: November 2020
The Soap Dispenser is supplied by Dolphin Solutions Ltd:
1 – Filling the dispenser
• This dispenser is only designed for PH neutral liquid
soaps
• We do not recommend using a high viscosity liquid soap
or get with may impair function
• Liquid soap with high sodium chloride content can cause
corrosion and may invalidate the product warranty
• When filling with liquid soap, be sure to wipe off liquid
spilled on the dispenser.
• We recommend using Dolphin solutions ltd, ‘Perlised’
liquid soap (Product Code: LIQUIDSOAP
2 - Maintaining the Dispenser
• If the dispenser fails to function, empty the liquid soap
from the soap tank and re-fill with warm water. Pump
the warm water through the dispenser to dislodge any
dried soap residue and then re-fill the container with fresh
liquid soap.
• Only clean inside the dispenser with warm water. Never
use solvent or aggressive household cleaners like bleach,
acids (eg. Descalers) or ammonia-based bathroom clearer
• To clean the outside of the dispenser, use warm soapy
water or approved stainless steel cleaner. Clean along the
grain. Never use abrasive cloth to remove stubborn stains.
Dry with a soft clean cloth.
• Dolphin Solutions Ltd recommends “Steel Clean” cleaning
agent obtainable from: Vitopan Tel: 01204 863000
• Should brown deposits appear around the lid or pump,
remove with cleaning cloth and soapy water. Hard depos-
its can be scratched off. This deposit is not rust (stainless
steel does not rust) and try to avoid It, try changing to a
milder liquid soap with neutral PH
• Abrasive cleaners, chloride cleaning agents and carbon
steel brushes/ steel wool will scratch the stainless steel
and must not be used
3 - Warranty
This product is covered by a 12 month warranty from the date
of purchase to be free from defects if installed and maintained
in accordance with these instructions. Dolphin Solutions will
replace or repair (as appropriate) free of charge any product
with a proven manufacturing defect if reported within the
warranty period.
Filling, cleaning and maintenance of
stainless steel soap dispensers
