ZMC408CE Motion Controller Hardware Manual V1.5
⚫
Please use STP, especially in bad environments, and make sure the shielding layer is
fully grounded.
3.4.2.
Basic Usage Method
(1)
Please follow the above wiring instructions to wiring correctly.
(2)
After powered on, please use EtherNET or RS232 o connect to ZDevelop.
(3)
Analog input voltage can be read through “AIN” command and corresponding analog
voltage can be output
through “
AOUT
” command, also,
data of each channel can be
checked
through “ZDevelop/
View/AD/DA
”. Please refer to “ZBasic” for details.
3.5.
RS232/RS485 Serial Port
RS232 and RS485 are integrated in one standard DB9 male socket and support
MODBUS_RTU protocol and custom communication.
→
Interface Definition:
Terminal
PIN
Name
Type
Function
1, 6, 8
NC
Spare
Reserved
Summary of Contents for ZMC408CE
Page 1: ......
