ZMC212BE Motion Controller User Manual V1.5
are in the same power supply system, this connection can also be omitted.
3.5.2.
Basic Usage Method
(1)
Please follow the above wiring instructions for correct wiring.
(2)
After power on, please use any of the three interfaces ETHERNET, RS232 and RS485
to connect to ZDevelop.
(3)
Terminal can be operated to ON or OFF directly through “OP” command, also, it can
be opened or closed through “ZDevelop/View/Op”. Please refer to “ZBasic” for details.
3.6.
AD/DA Analog Input & Output
The analog port adopts a set of 6Pin screw-type pluggable terminals with a pitch of
5.08mm.
→
Wiring Definition
Terminal
Name
Type
Function
DA1
Output
Analog output terminal AOUT(1)
Summary of Contents for ZMC212BE
Page 1: ......
