Set the printing temperature
to the PLA material., Nozzle
200 0C, Bed 60 0C.
If your filament is not loaded,
feed it using arrows on the
screen. If your filament is
already loaded choose “Next”.
Wait for the machine to
finish printing pattern.
Choose “Calibrate”.
Take the calibration cable
and connect wider end to the
RIGHT frame socket.
Connect the narrow end
of the calibration cable to
X-carriage B socket.
Choose “Maintenance”.
Choose “Auto 3-point”. Wait
for the machine to heat up
and finish the probing.
To ensure best calibration
result print calibration
pattern. Choose “Start”.
1
4
7
8
9
2
5
3
6
Autocalibration
Summary of Contents for VX
Page 1: ...Quick Start Guide...
