Product Manual - ZMORPH FAB
50
3D printing workflow
12. 3D printing workflow
12.1 Toolheads
Single Extruder Toolhead 1.75mm
A basic toolhead giving access to all 3D printing functionalities using 1.75 mm filaments. It’s perfect for
manufacturing single-material prototypes, jigs and fixtures, and other high-quality models from almost
all materials available on the market such as: ABS, M-ABS, PLA, HIPS, Flex, PVA, PET, ASA and similar. The
default nozzle is 0.4 mm
Specification:
▪
Construction: High-quality 3 mm
aluminium frame
▪ Hot End: M6 thread 1.75mm nozzle
▪ Temperature control: 1 thermistor
▪ Temperature range: 0 - 250 ˚C
▪ Nozzles: 0.3, 0.4, 0.6 mm
▪ Motor: Nema 17 stepper motor
▪
Extrusion: Direct drive
▪ Work area: up to 235 x 250 x 165 mm
▪
Recommended printing resolution:
0.2 mm (200 microns)
▪
Supported printing resolution:
0.05 - 0.4 mm
▪ Extruder dimensions: 125 x 115 x 58 mm
Cooling fan
Nozzle
Thermistor
Heating block
Heat break
plug (A, B)
Pressure adjustment screws
Toolhead cables
(left, right)
