Product Manual - ZMORPH FAB
111
CNC milling workflow
13.4 Milling cutter fastening
To ensure safe and reliable milling process, you must properly mount your milling cutter.
The process is the same regardless of cutter type and geometry.
Remove the CNC Milling
Toolhead from your machine.
Take a 13 mm spanner and an
adjustable wrench.
Slide the 13-mm spanner into
the shown slot.
Adjust the size of wrench to
17 mm and hold down the
collet fastening nut. Loosen
the nut.
Take out the old cutter if any
is inserted.
Put in a new cutter. Ensure
that it is inserted at least 15
mm deep.
Firmly tighten the collet nut.
Mount the CNC toolhead on
the X-carriage
