HOW TO INSTALL
Before installation
Please read the following instructions before installing your camera:
You have to check whether the
location
(
ceiling
or
wall
)
can
bear
five
times
the
weight
of
your
camera
.
Do not allow the cable to be caught in a pinched area, otherwise the electric line cover may be
damaged. This may cause cable breakdown or fire.
When installing your camera, don
'
t allow anyone
to walk or stand under your
installation
site,
and remove all valuable items. A dropped camera may cause injury to bystanders or harm to
valuable items.
Installation procedure
To install your camera
Drill two holes on the mounting location(ceiling or wall). Put the two screws supplied in the
package into the holes on the base of the camera. Fix the camera onto the mounting
location by twisting the screws into the holes using a screwdriver. The camera is now installed on the
mounting location.
Note
: Make sure that the lens of the camera is facing the monitoring area. To adjust the scope of the
lens, you will need to remove the base from the camera by twisting out the screws, and then rotating
the lens left and right, up and down to make sure that it is facing the monitoring area.
1
step
5
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax:
Tel: 0755-3363-1636
0755-3363-1639
