HOW TO INSTALL
6
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax:
Tel: 0755-3392-6029
0755-3392-5683
Last, adjust the slope of the lens by
twirling the cameras up and down, left
and right to make sure that the front of the Main
Body is facing
the
camera’s monitoring
area
.
3
step
Attach the Main Body to the mounting
location using the 4 screws supplied
in your package.
As
shown
in
the
picture
,
push
the 3 screws
into
the
three
holes
at the
end of the camera Mount Bracket
,
then twist
them into the holes on the wall or celling
using screwdriver.
2
step
There are three screws on the front end of
the camera Mount Bracket. With the screws
on the two sides, you can adjust the cameras
up and down, and with the screws under it,
you can adjust the cameras left and right to
makesure that the camera is facing the
monitoring area.
Note
