Zmodo IP Camera
11 |
P a g e
Technical Support
[email protected]
1-217-903-5674
3.2 – CONNECTING YOUR CAMERA TO YOUR LOCAL NETWORK-CONTINUED
12.
From the Search Tool, select your IP camera,
then click on Modify Settings.
13.
Here, you will need to re-address your camera’s
IP address based off of your Default Gateway.
For example; if your Default Gateway is
192.168.1.1, you should change the last set of
values of your address from 1 to a larger value
such as 99. Therefore, your new address will
read “192.168.1.99” (The last set of values must
be lower than 254)
14.
Next, change the Gateway and the DNS IP
address in the network settings to exactly match
your Default Gateway.
15.
Now, change the Data Port to 80.
16.
Last, enter the Username and Password. The
Username will be ‘admin’ and the Password
field will remain empty.
17.
Last, click ‘OK’ and your camera will
automatically reboot as it saves all changes that
you have just made.
*The first time that you connect to your camera
either from your local network of from a remote
network, you will need to connect using an
Internet Explorer browser, and you must
prompt three necessary ActiveX Controls.
Please refer to Section 4 for ActiveX
configuration.
