Terms of Guarantee
ZM Pumpe guarantees the equipment in this manual and will repair, or replace any components which might fail in normal
service, or where manufacturing defect may be identified.
Period of guarantee
24 (twenty and four) months, from the date of the sale.
Application of the guarantee
The guarantee will honoured by ZM Pompe, after examination of the faulty unit and where failure is as a result of a
mechanical, or manufacturing defect.
Pumps will only be replaced in situations where repairs cannot be successfully carried out by replacement of failed
components.
Loss of the guarantee rights
Any one of the following that will automatically revoke the provisions of the guarantee:
Use of equipment in contravention of the recommendations of this manual, abuse, over work, or accidents
• Incorrect handling, preventive/corrective maintenance of incorrect usage
• Use of components not provided by ZM Pompe
• Alterations to the pump, or components not sanctioned by ZM Pompe
• Change, destruction or loss of the original sale documentation
Items exluded from the guarantee:
The items below are not covered by the guarantee:
Wear and tear due to normal usage: the filter elements, the leather carriers, O rings, valves, cylinders, movements, as well
as the carrying out of routine maintenance
• Components destroyed, or disabled by natural causes, other than caused by manufacturing, installation (if by ZM
Pompe) or raw material defect
• Failure due to accident
• Incorrectly specified, or employed hydraulic oils, lubricants, greases and similar materials
• Damage by the user, or a third party
• Damage caused during transit
Note:
The guarantee does not cover the expense of transportation. This charge will for the
customer’s account.
Precautions
• Do not attempt to stop the pump with pieces of wood, iron or other objects
• Do not lubricate the leathers with the grease, oil or other lubricants, only use Vaseline
• Do not exceed the oil limit stipulated in the manual
• Do not forget to change the pump oil after it’s useful life
• Ensure that water to be lifted is not in the same stream as the water used to drive the pump
• Do not permit the pump rotational speed to exceed the maximum r.p.m. indicated in the specification
• Do not attempt to lift water containing sand and/or grit
• Do not reuse the leather seals
• Ensure that he pump is properly installed and clear of any rocks, trees or other elements which might cause damage
under extreme weather and environmental conditions
• Utilise a decanting tank and a filter for sand in the suction section
Follow these simple instructions for maximum pump life and minimal maintenance.
