IMPORTANT
SPECIFICATIONS
FCC ID: 2AMY9MS100
IC: 22968-MS100
WARRANTY
A Z-Wave network can integrate devices of various classes, and these devices can be
made by different manufacturers. The ZLINK product introduced in this instruc�on
manual has Z-Wave cer�fica�on which guarantees such an interoperability.
This device complies with part 15 of the FCC rules. Opera�on is subject to the
following two condi�ons: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired opera�on.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifica�ons or changes to this equipment. Such modifica�ons or
changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protec�on against harmful interference in a residen�al
installa�on. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruc�ons, may cause
harmful interference to radio communica�ons. However, there is no guarantee that
interference will not occur in a par�cular installa�on. If this equipment does cause
harmful interference to radio or television recep�on, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
This device complies with Part 15 of the FCC Rules and with RSS of Industry
Canada. Opera�on is subject to the following two condi�ons:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference at may
cause undesired opera�on.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploita�on est autorisée aux deux condi�ons
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'u�lisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est suscep�ble d'en comprome�re le fonc�onnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Z-Wave is a registered trademark of Silicon Labs.
ZLINK warrants to the original purchaser of this product that for the warranty period,
this product will be free from material defects in materials and workmanship.
The foregoing warranty is subject to the proper installa�on, opera�on and
maintenance of the product in accordance with installa�on instruc�ons and the
opera�ng manual supplied to customer.
Warranty claims must be made by customer in wri�ng within 30 days of the
manifesta�on of a problem. ZLINK’s sole obliga�on under the foregoing warranty is
to repair, replace or correct any such defect that was present at the �me of delivery
or during the warranty period. The warranty does not extend to consequen�al or
incidental damage to other products that may be used with this product. For inquiry
and customer service, email to [email protected]
Warranty period: limited 1 year from date of purchase.
All brand names shown are trademarks of their respec�ve owners.
www.ZLINKProducts.com
70 Commercial Ave. Warehouse A
Moonachie, NJ 07074
LD100_062818_En_v2
COMMAND_CLASS_ZWAVEPLUS_INFO,
COMMAND_CLASS_ASSOCIATION,
COMMAND_CLASS_ASSOCIATION_GRP_INFO,
COMMAND_CLASS_TRANSPORT_SERVICE_V2,
COMMAND_CLASS_VERSION,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_DEVICE_RESET_LOCALLY,
COMMAND_CLASS_POWERLEVEL,
COMMAND_CLASS_BATTERY,
COMMAND_CLASS_SECURITY_2,
COMMAND_CLASS_NOTIFICATION_V3,
COMMAND_CLASS_WAKE_UP,
COMMAND_CLASS_CONFIGURATION,
COMMAND_CLASS_SENSOR_MULTILEVEL_V7,
COMMAND_CLASS_SUPERVISION,
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
COMMAND_CLASS_SENSOR_BINARY
COMMAND_CLASS_BINARY_SWITCH_V1 (Only supported on micro USB power mode)
Specific Key (DSK) on the side of the unit and packaging
that is required to add or re-add the device to a network
with a controller suppor�ng Security 2 (S2). S2 Security is
an advanced encryp�on technology. SmartStart is a
pre-provisioning technology that provides easier inclusion
with compa�ble controllers. Be sure to save the DSK code
for each device and store in a safe place. Do not remove
the DSK from the product. Take a photo of the full DSK
code on the packaging or write the full code here:
FOR INDOOR USE ONLY
Interoperability with Z-Wave devices
www.ZLINKProducts.com
www.ZLINKProducts.com
Supported Command Classes:
Supported No�fica�on Types
Water Alarm
0x05
0x02
0x00
Water Leak Detected
Model
Input power
Radio frequency
Wireless range
Normal opera�ng
temperature
ZL-LD-100
5 VDC or by 3 x AAA ba�eries
908.4/916 MHz.
32
o
F- 122
o
F ( 0
o
C - 50
o
C)
Up to 132 � line ofo sight between the device and other
available nodes.
No Water Detected
Cut out and save the important informa�on below:
Your Z-Wave device has a unique Device
Installa�on Date:
Device Loca�on:
Z-Wave Device Specific Key (DSK)
Supported Event
Reorient or relocate the receiving antenna.
Increase the separa�on between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
•
•
•
•
