14
OPERATION
FILLING THE RINSE-AID AND SETTING
1.
USA-CAN - 16
5.8.Rinse - aid Usage
Rinse-aid makes dishes sparkle and helps
them to dry without spotting. Rinse-aid is
required for stain-free utensils and clear
glasses.
(!)Use only rinse-aid for domestic
dishwashers.
(!)Filling the rinse aid reservoir with
detergent will damage the reservoir. Only
pour rinse aid formulated for residential
dishwashers into the reservoir.
NOTE:
When the Rinse Aid indicator
lights up, the rinse aid reservoir contains
sufficient rinse aid for 2 - 3 programs only.
When using “Tab” detergents rinse aid is
not needed.
5.9 Filling The Rinse-aid and Setting
1) To fill the rinse aid compartment, open
the rinse-aid compartment cap (Fig.A)
2) Fill the compartment with rinse aid to the
MAX level and then close the cap.Be
careful not to overfill the rinse aid
compartment and wipe up any spills.
3) Close the cap until it click. Otherwise
water can enter the rinse aid reservoir
during a program.
In order to change the rinse aid level,
follow the below steps before turning on
the machine
In order to add rinse aid to the machine,
1. Open the door of the machine,
2. Press and hold “Start/Pause + On/Off”
key for 3 seconds,
3. The machine gives an audible warning
when it is ON,
4. Then, press and hold “Program Selection
+ Cancel” key until “rA” is represented on
the display, the machine will display the last
setting,
5. The amount of rinse aid is adjusted by
pressing “Program Sel Cancel” key,
6. After the adjustment, turn off (by pressing
Start/Pause + On/Off key) the machine to
save the selected rinse aid amount.
NOTE:
If the dishes are not drying
properly or are spotted, increase the level If
blue stains form on your dishes, decrease
the level.
Level
Brightener Dose
Indicator
1
Rinse - aid not
dispensed
r1 is shown on the
display.
2
1 dose is
dispensed
r2 is shown on the
display
3
2 doses are
dispensed
r3 is shown on the
display.
4
3 doses are
dispensed
r4 is shown on the
display.
5
4 doses are
dispensed
r5 is shown on the
display.
To fill the rinse-aid compartment, open the rinse-aid compartment door.
2. Fill the compartment with rinse-aid to the Max level and then close the door. Be
careful not to overfill the rinse-aid compartment and wipe up any spills.
3. Close the door until it clicks. Otherwise, water can enter the rinse-aid reservoir
during a program.
In order to change the rinse-aid setting, follow the below steps before turning on the
dishwasher:
1. Open the door of the dishwasher,
2. Press and hold “Start/Pause + On/Off” button for 3 seconds.
3. Immediately after "--" is seen on the display and the machine gives an audible
warning, release "Start/Pause + On/Off" button, press and hold "Program
Sel Cancel" button until "rA" is represented on the display. The machine
will display the last setting.
4. The amount of rinse-aid is adjusted by pressing “Program Sel Cancel”
button.
5. After the adjustment, turn off (by pressing "Start/Pause + On/Off" button) the
dishwasher to save the selected rinse-aid amount.
NOTE
: If the dishes are not drying properly or are spotted, increase the level. If blue
stains form on the dishes, decrease the level.
Level Brightener Dose
Indicator
1
Rinse - aid not dispensed r1 is shown on the display
2
1 dose is dispensed
r2 is shown on the display
3
2 doses are dispensed
r3 is shown on the display
4
3 doses are dispensed
r4 is shown on the display
5
4 doses are dispensed
r5 is shown on the display
14
Deter
gent Usage
