19
Crisper compartment
To remove the crisper
• Pull the crisper out until it stops.
• Slightly unclip the front section of the drawer and take it out completely.
To install the crisper
• Pull the rails out completely.
• Place the gap at the rear corners of the crisper to the detail located at the rear corners of
the rails.
• Push the crisper slowly down until you feel it clip front onto the rails.
ATTENTION
Make sure that the details at the right and left-hand sides are fixed
when installing the crisper.
ATTENTION
Never leave the vegetables in their plastic bags in the crisper. If they
are left in their plastic bags they will rot in a short period of time.
The crisper compartment preserves the humidity of your vegetables,allowing you to store
them for a long time without having to keep them in their bags.
If you do not prefer the vegetables to get into contact with other vegetables due to hygienic
reasons, you can use perforated paper, foam or a similar material instead of plastic bags.
While the vegetables are being replaced, their specific weights should be taken into consid-
eration.
Heavy and hard vegetables must be placed at the bottom of the crisper and light and soft
vegetables must be on the upper part.
Pears, kiwis, tomatoes, cucumbers, apricots, peaches, broccolis, lettuces, cabbages, parsley
and spinach are fruits and vegetables that emit ethylene gas.
Do not place them into the same crisper with other fruits and vegetables. The ethylene gas
emitted by these foods cause other fruits and vegetables to ripen sooner and to rot in a
shorter span of time.
Do not remove the main body of the crisper from the refrigerator separately unless you have
to do so.
19
Cripser Dr
awer
s
20
Cripser Dr
awer
s
OPERATION
OPERATION
