10
BEFORE INSTALLATION
INSTALLATION ADJACENT TO CABINETS
• The range may be installed directly adjacent to existing standard countertop cabinet
heights of 36" (914 mm) from the floor.
• For the best look, the range top should be level with the cabinet countertop, depending
on your kitchen layout. This can be accomplished by adjusting the leg height as
noted on page 12.
•
NOTE:
The range CANNOT be installed directly adjacent to kitchen walls, tall cabinets,
tall appliances, or other vertical surfaces above 36" (914 mm) high. The minimum side
clearance in such cases is 6" (152 mm).
• Wall cabinets with minimum side clearance must be installed 18" (457 mm) above the
countertop with countertop height between 35 1/2" (901 mm) and 37 1/4" (946 mm).
The maximum depth of wall cabinets above the range shall be 13" (330 mm).
CABINET CUTOUTS
• For cutout depth, the recommendation for all RAIND models is the standard cabinet
depth of 24" (610 mm) so the front face of the oven sticks out from the counter to fully
and safely open the door for optimal use.
• For cutout width between cabinets, the recommendations below are slightly larger than
the actual product widths noted on pages 9 and 11; this allows for minimal
clearance on each side. Kitchen layouts may vary slightly, so adjust accordingly.:
•
RAIND-24 series ranges:
24" (610 mm)
•
RAIND-30 series ranges:
30" (762 mm)
•
RAIND-36 series ranges:
36" (914 mm)
WARNING
Do not install ranges in an island configuration. Exposed areas of the range
may become hot and can cause injury.
Cabinet Cutouts