28
27
Securing th
e Dishwash
er
Method 2
1. Remove the plastic tub caps from the inside of the dishwasher tub.
2. Drive a wood screw through the hole in the side of the dishwasher into the
cabinet frame.
3. Reinsert the plastic tub caps.
Important:
Drive the screws straight and flush. If the screws are too
tight, the sides will bow. Do not over tighten. Protruding screw heads
will scratch the side if the dishwasher. This method is for attaching the
dishwasher to the side of the cabinet and it should be done when the
countertop is made of granite or other breakable materials.
INSTALLATION INSTRUCTIONS
Connecting th
e W
ater Supply Line
INSTALLATION INSTRUCTIONS
STEP 13: CONNECTING THE WATER SUPPLY LINE
1. Make sure that you wrapped the 90° elbow with Teflon thread seal tape twice.
2. Slide the compression nut, then the ferrule over the end of the water supply line.
Note:
If you use braided stainless steel, you do not need a ferrule or
compression nut.
3. Insert the water supply line into the 90° elbow.
4. Slide the ferrule against the 90° elbow and secure it with the compression nut.
Important:
Make sure that the door spring does not rub or contact the
water supply line or drain hose. Test by opening and closing the door.
Reroute the lines if interference occurs.
YOU’LL NEED
• Adjustable wrench
• Hot water line kit
• Teflon thread seal tape
