29
PREPARING THE DISHWASHER
1. Open the door of the dishwasher.
2. Place dishes in accordance with the instructions detailed on previous pages.
3. Make sure that the upper and lower spray arms rotate freely.
4. Put adequate amount of detergent into the detergent dispenser.
5. Check if the rinse-aid indicator light is on and add rinse-aid if needed.
PROGRAM SELECTION
6. Press the On/Off button to turn on the dishwasher. Note that the door of the dishwasher
is in the OPEN position.
7. Refer to the “Programs Table” to determine a washing program suitable for the dishes.
8. Press program selection button until the number of the program selected appears on
the display.
STARTING THE PROGRAM
• Open the door of your dishwasher. Select the program and optional functions. The program
duration and program number will appear on the display alternately. Press “Start/Pause
+ On/Off” button. Close the door within 4 seconds, and the program will start.
• If the door is not closed within 4 seconds, the dishwasher will not start. In this case,
to start the selected program, the door must be opened, the Start/Pause button must
be pressed and the door must be closed again within 4 seconds after the Start/Pause
button is pressed.
• The total time can change while the program is running depending on the ambient
temperature where the dishwasher is installed, temperature of the supply water, and
amount of the dishes.
• If the door is opened while the dishwasher is running, the dishwasher will switch to
the standby mode. Press Start/Pause button and close the dishwasher door within 4
seconds, and the program will resume.
OPERATION
Pr
ogr
am Selection