9
W
ater Supply
INSTALLATION
Step 3: Check Water Supply Requirements and Cautions
• The hot water supply line pressure must be between 20 PSI and 145 PSI.
• Adjust the water heater to deliver water between 120°F and 149°F.
- The dishwasher must be connected to a hot water supply between 120°F and
149 °F. This range provides the best washing result with the shortest cycle time.
Temperatures also should not exceed 149°F to prevent damage to dishes.
- Ensure that the water supply valve is turned off before connecting the hot water
supply line to the dishwasher.
- Seal the hot water supply line connections using Teflon tape or sealing
compound to stop any water leakage.
- When you install the dishwasher, ensure there is nothing on the drain hose —
which comes already attached to the back of the unit — and be careful not to
tear it during the installation process.
Figure 2
