Zline BLISS Series, Installation And User Manual

Page: 36 / 39

32
Troublesh
ooting
PROBLEM POSSIBLE CAUSE SOLUTIONS
There is leakage under
the handle.
The locking nut has come loose.
Unscrew the lever on the
handle by hand. Loosen set
screw with an Allen/hex
key. Remove the handle and
unscrew trim cap by hand.
Tighten locking nut with an
adjustable wrench.
Water will not shut off
completely.
Cartridge may be defective.
Unscrew the level on the
handle by hand. Loosen set
screw with an Allen/hex
key. Remove the handle and
unscrew trim cap by hand.
Unscrew the locking nut
with an adjustable wrench.
Remove ceramic disc
cartridge. Check for cracks.
There is a leak between
the spray head and the
hose. The spray head may be loose
or the washer is not seated
correctly in the hose connection.
Tighten the spray head
by hand until snug. Make
sure the washer is seated
correctly.
TROUBLESHOOTING