USBCANFD-200U/100U
USBCANFD Series CANFD Interface User Manual
©2021 Guangzhou ZLG Electronics Co., Ltd.
8
User Manual
3.
Driver Installation
This document uses a PC running Windows 7 as an example to describe how to install the USBCANFD-200U
(100U) driver.
3.1
Installing the Driver under Windows
Connect the USBCANFD-200U (100U) interface card to the computer with a USB cable, and ensure that the
device is powered properly.
Right-click [Computer] and choose [Properties] (as shown in Figure 3.1) to start the Device Manager. Before
the driver is installed, the Device Manager is displayed, as shown in Figure 3.2. If the device manager does not
display the message, check that the USB cable is connected correctly, the USB port of the computer is disabled,
and the PWR indicator is on.
Figure 3.1 Staring the computer device manager
