PCIeCANFD-400U
PCIe Interface CAN (FD) Card
©
2022
Guangzhou ZLG Electronics Co., Ltd.
10
User Manual
2.6 Board Installation
2.6.1 Precautions
PCIeCANFD-400U series interface cards are electrostatic sensitive products and should be packed in a
special anti-static protective bag before delivery. Therefore, when operating the interface card, take necessary
protective measures to ensure that the interface card is not damaged by human contact with static electricity.
The PCIeCANFD-400U interface card should be installed when the PC/industrial computer has been
powered off
. Similarly, the interface card should also be disassembled when the PC/industrial computer is
powered off.
PCIeCANFD-400U series interface cards do not have any switches and jumpers for assigning interrupts and
I/O addresses, which are automatically assigned by the computer BIOS. Therefore, the board must be installed in
the PCI-E slot before you install the driver. The installation procedure is as follows:
1. Power off the computer and open the computer case cover;
2. Insert the PCIeCANFD-400U series interface card into a free PCI-E slot, x1, x4, x8, or x16 slot;
3. Tighten the screws to fix the board;
4. Power on the computer. At this time, the BIOS automatically assigns interrupts and I/O addresses to the
PCIeCANFD-400U interface card;
5. Install the driver.
Figure 2.6 Removing and inserting the PCIeCANFD-400U series CAN interface card
Note: Do not remove or insert the PCI-E interface card with power on; do not touch the device with your hands
during installation to prevent static electricity from damaging the device.
2.6.2 Product Dimensions
The physical dimensions of PCIeCANFD-400U are 117 mm x 120.02 mm (including metal baffle). Figure 2.6