5
©2017 Guangzhou ZHIYUAN Electronics
Date: 2017/05/22
User Manual
V1.00
Guangzhou ZHIYUAN Electronics Co., Ltd.
CAN-bus recording analyzer
CANREC User Manual
3.3 Port (Front panel)
Figure 3- 2 shows the front panel of CANREC. For the description, please see Table
3- 2.
Figure 3- 2: CANREC front panel
Table 3- 2: Ports (from left to right)
No.
Description
Remarks
1
USB2.0 interface (host)
Connect with U disks for data export.
2
Soft switch button
Short press this button to start the instrument
and long press it to shut down the instrument.
3
Main display panel
Display operations.
4
Power indicator
The red Power indicator is on after power-on. If
the instrument is powered by the battery, the
green Power indicator is on.
5
HDD operation indicator
Hard disk indicator. The yellow light flashes
when the internal SSD is being read or written.
6
Screen operation buttons
Five buttons used to operate the display screen.
7
CAN channel status indicators
Used to indicate the communication state of
each CAN. The corresponding green indicator
flashes when a channel receives data.
8
Operation control buttons
Four buttons (Up, Down, Left, Right) for move
operations; SET button for setting and confirming
operations; ESC button for canceling operations;
OK button for confirming operations.
