background image

Shanghai ZLAN Information Technology Co., Ltd          Tel: +86-17321037177          http://www.zlmcu.com 

Figure 1 ZLAN8100 GPRS DTU 

Can be applied to: 

 

Industrial remote control/sensing/measurement 

 

Meteorological Data Acquisition 

 

Three-Proofing & Hydrology Monitor 

 

Finance, GPRS, etc. 

Typical  application  connections  are  shown  in  FIG.  2.  Connect  the  232/485  devices  on 

site  to  ZLAN8100,  then  connect  to  the  Internet  via  GPRS  network  so  that  the  remote 

data center can be connected to ZLAN8100 GPRS DTU. 

 

Figure 2 Connection Diagram 

2.  Feature 

1)  Support user data transparent transmission 

2)  Support  connecting  data  center  through  fixed  IP  and  dynamic  domain  name 

resolution methods 

3)  Support TCP/UDP/SMS three data link communication modes 

4)  Support two working mode: real-time online and data triggering online 

5)  Support TCP/UDP link online to send custom registration packet function 

6)  Support TCP/UDP link sending custom heartbeat packet function 

7)  Support TCP/UDP link offline sending custom deactivation packet function 

8)  Support query and configure device parameter via remote SMS command 

Summary of Contents for ZLAN8100



















Reviews: