Shanghai ZLAN Information Technology Co., Ltd Tel: +86-17321037177 http://www.zlmcu.com
17
Click the
“Edit Device” to configure the device parameters.
Figure 9 Device Parameters
In this interface, the user can set the parameters of the device, then click "Modify
Setting", and the parameters are set to the flash of the device, with power-off no
lost. The device will restart automatically.
The main configuration parameters are: baud rate, data bit, and check bit in serial
port setting; IP address, subnet mask, gateway in network setting; Sometimes you
need to configure the work mode of the serial port server according to the
computer software.
The meaning of the parameters is described as follows:
Table 5 Parameter Meaning
Parameter
Name
Value Range
Instruction
Virtual Serial
Non-in use, created
virtual serial port
You can bind the current device to a created virtual serial
port.
Dev Type
Show only the model of the core module
Dev Name
Any
You can give the device a readable name, with a maximum
