ZL electronics Technology 900C, User Manual

Page: 9 / 13

ZL ELECTRONICS TECHNOLOGY (HK) CO., LIMITED
10 Check GPRS interval
of position refresh
A******, 507 507: command code
******: password, default 000000
11 Inquire GPRS
parameter
Return Including IP,
Port, APN
A******, 006 006: command code
******: password, default 000000
12 Control the output A******, 007 ,P,F 007: command code
******: password, default 000000
P: the position of the output
P =1 output 1
P =2 output 2
F: the control signal
F =1 give the relay the current to drive it (cut
off the car power).
F =0 cut off the current of the relay (comeback
the normal).
13 Time zone setting A******, 008 ,+08 008: command code
******: password, default 000000
+08: Set the local time zone, the default value
is +08
14 Inquire the system
parameter.
Including the software
version, password,
interval, speed limit,
area limit, I/O state,
GPS state, SOS
number, control number,
etc
A******, 009 009: command code
******: password, default 000000
15 GPRS switch A******, 010 ,X 010: command code
******: password, default 000000
X: GPRS function
=0 GPRS OFF
=1 TCP ON and updata in time interval
strictly
=2 TCP ON and updata in factory mode.
=3 TCP ON and updata in save mode.
9