Overview
5
Right View
1.5 Connecting Terminal
(1)
(2)
(3)
1.
Power Interface
: Connect to the adapter. This IPC employs the power supply
of DC 12V and no lower than 1A. Do not use any different power supply as it
may damage the camera.
2.
Network Interface
: 10/100M self-adapting Ethernet interface is used to
connect the camera with various network equipments, such as, switch, router
and hub. When it is connected to 10M network, the orange lamp is also on.
When it is connected to 100M network, the green lamp is always on.
This interface can also employ Ethernet power supply (POE, optional) and allow the
transmission of power and data through Ethernet cable.
3.
Reset Button:
When the camera fails to function during incorrect operation or
accidental failure (e.g. forget IP address or password), or it is used in different
scenes, press down the button for above 5s after a delay of 30s from powering
on to restore the camera to its factory default. The default user’s name is
“
admin
”, the default password is “
admin
” and the default IP address is
“
192.168.1.88
”.
PoE Swicth
