ZKRF10M&ZKRF20M
User Manual
P a g e
| 14
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
3
Deactivator and Detacher
Deactivator
3.1.1
Instruction
The RF(Radio Frequency) deactivator is an accessory product of the 8.2MHz RF detection system. Used to
decode soft tags. It consists of 18V DC power adapter and decoder board. The green light on the decoding
board represents the working indicator, which is always on in the standby state, and the red light is on and
the buzzer sounds when decoding. Try to place the item as close to the center of the deactivator panel as
possible while decoding, and try back and forth a few times until the buzzer does not sound. The
deactivator works together with the 8.2MHz RF detection system, and is generally installed on the cashier
to decode the protected goods.
3.1.2
Power Supply
Input Power
18V 1A(DC)
Power Insurance
250V 1A
Decoding Height
maximum 15cm (soft tag)
Maximum Current
150mA (when decoding)
Quiescent Current
not more than 110mA
3.1.3
Installation Preparation
Choose the installation location; the hole's dimensions are 205mm*215cm.
Connect the power adapter and the decoder (pay close attention to observe whether the adapter is
compatible with the power grid in the area).
3.1.4
Deactivator and Soft Tag
3.1.5
Power Connection
Plug and play, no setup required.
