Mobile Stand Installation Guide
Installation steps
Version: 1.1
Step 1
Step 2
Adjust the wheel to the brake state and screw it into
the brackets (as Figure 1).
Attach the Wall Bracket to the Left Bracket (as
Figure 2), 3 sets of mounting heights (1 & 4, 2
& 5, 3 & 6), optional on demand.
· To ensure correct and safe use, please read
carefully this manual before installation.
· It is recommended to equip this model with a 55 to 86
inch interactive whiteboard.
Adjust the wheel to
the braking state
before the operation.
· The maximum weight of the bearing can support up to 100 kg.
one
hole position
two
of support
3
4
5
6
one
Wall Bracket Hole Suggestions
Compatible models
matching holes
Packing list
55“
3, 6
2, 5
1, 4
65" - 70"
75" - 86"
Front of
Front of
A - Left bracket 1 piece
C - Wall bracket 1 piece
E - Wheels 4 pieces
Figure 1
Figure 2
Step 3
Step 4
Attach the right bracket to the other end of the bracket.
wall (as shown in Figure 3).
Installing the tray between the two
supports (as in Figure 4).
First insert the
B - Right bracket 1 piece
D - Tray 1pc
F - Bar for hanging on the wall 2 pieces*
tray in the
positioning pin
on the stand
Cross Slotted Recessed Hex Head Screw
M8×25mm
14 pieces
one
Spring cushion M12
∅
20×
∅
13mm
4 pieces
M6 screw*
Phillips Screwdriver (User Prepared)
M6×130mm
2 pieces
1 pc
1 pc
adjust the
tray in the
Adjustable Wrench (Prepared by user)
positioning
bolts
hold everything
the bolts
one
Note: "*" Indicates that due to differences in models, some models include this accessory, please refer to the
current one.
figure 3
Figure 4
Translated from Spanish to English - www.onlinedoctranslator.com
