ZKTeco ZK-LPR Car ID, User Manual

Page: 74 / 79

User Manual - ZK-LPR Car ID
Page 74 of 79
c. Check that the sender device has connection TCP/IP to the camera at defined port. It can
be checked via telnet.
d. If the message is received correctly, the system log must show the line:
6.5 Problem with ACTIONS
If the action does not execute, verify the following points:
1) The action is enabled.
2) The detected plate is in the list that is defined the action.
3) There is a defined action to “all plate” list.
4) The detected plate is not in any list, there is an action defined in “not in list” list.
5) The date of the detection corresponds on a valid time defined in the scheduler.