ZKTECO White LCD Serials User Manual
Ad-hoc Model, click the drop-down box to select the wireless network
model, depending on the different topology of network.
The Infrastructure Model will apply to Hub and Spoke wireless network,
it include five Authentication Type that are OPEN, SHARED,
WEPAUTO, WPAPSK, WPA2PS.
The Ad-hoc Model is used in the peer to peer wireless network. It
includes OPEN, SHARED, WEPAUTO, and WPANONE four type of
Authentication Type.
Step 4:
Click the drop-down box to select the
Authentication Type
.
Step 5:
Click drop-down box to select
Encrypt Type
. When the item NONE of
encrypt Type is selected, then the password in WEP (Wired equivalent
privacy) and WPA (WiFi protested access) item is not permitted to
modify it, it is not need to input password too.
Step 6:
According to Authentication Type, and Encrypt Type, to input the
password, password complies with the criterion set down by the
software.
Note:
there are four group passwords in the WEP column, till the
all password have been set up is correct, the current password is
valid
Set Connection Parameter:
The device fully support two connection ways, one TCP/IP, anther one
is RS 232.
If you select TCP/IP, here the IP and Port value must to be assigned; its
value is same with one in the communication option of the device. Set
the option Ethernet in the device to “Yes”.
- 92 -
Summary of Contents for White LCD Series
Page 2: ......
Page 51: ...4 Device Settings 4 5 2 Access Verification Flow 45...
