VR10 Pro
User Manual
P a g e
| 10
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
6
Product Installation
1.
Confirm radar mounting holes
The installation hole of the radar is between 200 to 300mm from the inside of the straight boom and
650 to 800mm from the driveway ground (non-cement pier); the installation position is shown in the
figure.
2.
Drilling
Use an electric drill to drill a fixed hole suitable for M16 at the selected position of the barrier box. The
recommended drill bit diameter is 16mm.
3.
Fixed radar
M16 Nut
(a)
Radar through the box
(b)
The wiring harness passes
through the gasket and nut
