Ethernet and Cloud Server Settings
11
Click on > [
COMM.
] > [
Ethernet
]
to set the network parameters. If the TCP/IP
communication of the device is successful, the icon
will be displayed in the
upper right corner of the standby interface.
Click on > [
COMM.
] > [
Cloud Server Setting
] to set the server address and server
port, that is, the IP address and port number of the server after the software is
installed. If the device communicates with the server successfully, the icon will be
displayed in the upper right corner of the standby interface.
Note:
While pairing the device with ZKBioAccess MTD software. Make sure that the option
Enable Domain Name
is disabled and the correct server address and port are entered.
Server address:
Set as the IP address of the ZKBioAccess MTD server.
Server port:
Set as the service port of ZKBioAccess MTD (the default is 8088).
Main Menu
User Mgt.
User Role
COMM.
System
Data Mgt.
Personalize
Attendance
Search
Autotest
System Info
Access Control
L
192
.
168
.
163
.
200
0
.
0
.
0
.
0
4970
255
.
255
.
255
.
0
192
.
168
.
163
.
1
IP Address
Subnet Mask
Gateway
DNS
TCP COMM. Port
DHCP
Display in Status Bar
Ethernet
ADMS
8081
0.0.0.0
Server mode
Enable Domain Name
Server Address
Server port
Enable Proxy Server
Cloud Server Setting
HTTPS
