SC800
User Manual
P a g e
| 62
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
If the Shortcut key is set as a punch state key (such as check in, check out,
etc.), then it is required to set the punch state value (valid value 0 to 250),
name.
Set the Switch Time
The switch time is set in accordance with the punch state options.
When the
Punch State Mode
is set to
Auto Mode
, the switch time
should be set.
On the
Shortcut Key
interface, tap
Set Switch Time
to set the switch
time.
On the
Switch Cycle
interface, select the switch cycle (Monday, Tuesday,
etc.) as shown in the image below.
Once the Switch cycle is selected, set the switch time for each day, and
tap
OK
to confirm, as shown in the image below.
Note:
When the function is set to Undefined, the device will not enable the
punch state key.