ZKTeco ProBio(QR) User Manual Download

Page: 41 / 71

ProBio (QR)

User Manual

P a g e

| 40

Personalize Settings

Click

Personalize

on the

Main Menu

interface to customize interface settings, voice, bell, punch state

options, and shortcut key mappings.

Interface Settings

Select

User Interface

on the

Personalize

interface to customize the display style of the main interface.

Function Description

Function Name

Description

Wallpaper

It helps to select the main screen wallpaper according to the user preference.

Language

It helps to select the language of the device.

Full Name

Once enabled, the user will need to fill in his/her last name and first name when
registering.

Menu Screen
Timeout (s)

When there is no operation, and the time exceeds the set value, the device
automatically goes back to the initial interface.

Summary of Contents for ProBio(QR)






































































Search results

Summary of Contents for ProBio(QR)

Reviews:

Related manuals for ProBio(QR)

Brands by name

Popular brands

ZKTeco ProBio(QR), User Manual

Search results

Summary of Contents for ProBio(QR)

Reviews:

Related manuals for ProBio(QR)

Brands by name

Popular brands