Ethernet and Cloud Server Settings
Click
on
> [
COMM.
] > [
Ethernet
]
to set the network parameters. If the TCP/IP
communication of the device is successful, the icon will be displayed in the
upper right corner of the standby interface.
Click
on
> [
COMM.
] > [
Cloud Server Setting
] to set the server address and server
port,
that is, the IP address and port number of the server after the software is
installed. If the device communicates with the server successfully, the icon will be
displayed in the upper right corner of the standby interface.
Access Control Settings
Click
on
to enter the access control management interface and
> [
Access Control
]
set relevant parameters of access control.
9
