24 G3 Pro User Manual
6 Comm. Settings
Including Ethernet parameters such as IP address etc., serial Comm, PC connection, ADMS and Wiegand settings.
Tap [
Comm.
] on the main menu interface.
6.1 Ethernet Settings
When the device needs to communicate with a PC over the Ethernet, you need to configure network settings.
Tap
Ethernet
on the
Comm. Settings
interface.
Menu Item
Description
IP Address
The factory default value is192.168.1.201, please adjust them according to the actual
network situation.
Subnet Mask
The factory default value is 255.255.255.0, please adjust them according to the actual
network situation.
Gateway
The factory default value is 0.0.0.0, please adjust them according to the actual network
situation.
DNS
The factory default value is 0.0.0.0, please adjust them according to the actual network
situation.
TCP COMM. Port
The factory default value is 4370, please adjust them according to the actual network
situation.
DHCP
Dynamic Host Configuration Protocol, which is to dynamically allocate IP addresses for
clients via server.
If DHCP is enabled, IP cannot be set manually.
Display in Status Bar
To set whether to display the network icon on the status bar.
