ZKTeco FR1200 User Manual V1.0.1
6
3. Device Operations
After the reader is powered on, the reader can not identify the fingerprint or card. In
other words, the reader can not receive data or send data without access control
panel connection.
Only when the reader connected with the access control panel that the reader can
prompt if the card or fingerprint is enrolled or not, and verify the user according to
the returning result of background access control panel.
User verification operations:
1. When the reader connected with the access control panel, it is in verification state,
the beep with no sound, and the green LED blink once every two second to prompt
verification.
2. Start user verification. The reader supports four verifications modes: only
fingerprint, only card, fingerprint plus card, fingerprint or card verification. The
process include press fingerprint first or swipe card first, the operation are as the
follows:
Press fingerprint first:
(1) Press your finger on the fingerprint sensor in a proper way. The device beeps
once, and then the LED off, switch to the background verification.
(2) The access control panel determines whether the control order is timeout. If it is
timeout, the device beeps 3 sounds and the red LED solid on. Otherwise, it will get
the system verification modes setting.
Only fingerprint/card or fingerprint verification:
Send the fingerprint template to
the access control panel, and wait for the result. If it is waiting time out, beep 3
sounds and the red LED solid on. If the reader get the verification result in the
