FaceDepot-7BL
User Manual
P a g e
| 52
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Feature
Descriptions
1:1 Match
Threshold
Under the 1:1 verification method, the verification will only be successful when the
similarity between the acquired fingerprint data and the fingerprint template
associated with the entered user ID enrolled in the device is greater than the set value.
1:N Match
Threshold
Under the 1:N verification method, the verification will only be successful when the
similarity between the acquired fingerprint data and the fingerprint templates enrolled
in the device is greater than the set value.
FP Sensor
Sensitivity
Sets the sensibility of fingerprint acquisition. It is recommended to use the default level
“
Medium”
. When the environment is dry, resulting in slow fingerprint detection, you
can set the level to “
High”
to raise the sensibility; when the environment is humid,
making it hard to identify the fingerprint, you can set the level to “
Low
“.
1:1 Retry
Times
In 1:1 Verification, users might forget the registered fingerprint, or press the finger
improperly. To reduce the process of re-entering user ID, retry is allowed.
Fingerprint
Image
To set whether to display the fingerprint image on the screen during fingerprint
enrollment or verification. Four options are available:
Show for enroll
: Displays the fingerprint image on the screen only during enrollment.
Show for match
: Displays the fingerprint image on the screen only during verification.
Always show
: Displays the fingerprint image on the screen during enrollment and
verification.
None
: The fingerprint image will not be displayed.
Factory Reset
6.6
This feature restores the device parameters, such as communication settings and system settings, to
factory settings (will not clear registered user data).
Click
Reset
on the System interface.
