ZKTeco FaceDepot-7BL User Manual Download

Page: 42 / 89

FaceDepot-7BL

User Manual

P a g e

| 41

Feature

Description

IP Address

The factory default value is 192.168.1.201. Please adjust them according to
the actual network settings.

Subnet Mask

The factory default value is 255.255.255.0. Please adjust them according to
the actual network settings.

Gateway

The factory default address is 0.0.0.0. Please adjust them according to the
actual network settings.

DNS

The factory default address is 0.0.0.0. Please adjust them according to the
actual network settings.

TCP COMM. Port

The factory default value is 4370. Please adjust them according to the actual
network settings.

DHCP

Dynamic Host Configuration Protocol, which is to dynamically allocate the IP
addresses for clients via server.

Display in Status Bar

To set whether to display the network icon on the status bar.

Summary of Contents for FaceDepot-7BL



















































































Search results

Summary of Contents for FaceDepot-7BL

Reviews:

Related manuals for FaceDepot-7BL

Brands by name

Popular brands

ZKTeco FaceDepot-7BL, User Manual

Search results

Summary of Contents for FaceDepot-7BL

Reviews:

Related manuals for FaceDepot-7BL

Brands by name

Popular brands