6
Step 1: Remove the Existing Floodlight
Turn off the power at circuit breaker or fuse box.
1.
2.
Remove the existing floodlight and pull it out from the wall to reveal the wires.
3.
Step 2: Install the Mounting Plate
Attach the mounting plate to the existing junction box.
1.
To fix it, use the appropriate plate and screws that are given.
2.
Note:
The mounting plate concave side must be facing outward.
Check with an electric tester to make sure that the power is switched off
before the installation.
Summary of Contents for C9AP Series
Page 3: ...2 Table of Contents...
