BG300 Barrier Gate
User Manual
P a g e
|
2 6
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Solution:
1.
Check the wiring according to the wiring diagram and tighten the wiring if required.
2.
Replace the motor.
3.
Re-adjust the motor limit parameters.
4.
Problem:
The remote-control buttons do not respond.
Cause:
1.
The remote-control battery is completely discharged.
2.
There must be a signal interference with the same frequency.
3.
There may be obstacles nearby.
4.
The remote-control frequency is not matched, or the receiver is damaged.
Solution:
1.
Replace the battery.
2.
Use manual button control.
3.
Use in open areas.
4.
Replace the remote control to re-match or replace the receiver.
5.
Problem:
When the gate is closed halfway, it bounces back to the open state.
Cause:
1.
The barrier boom might not be installed.
2.
The spring is too tight, or the length of the barrier boom is changed, and the spring is
not properly adjusted.
Solution:
1.
Install the barrier boom.
2.
Adjust the spring according to the length of the barrier boom.
