User's Manual for ZKSD3 Series PTZ Dome IP Camera
6
6. Audio Input Interface:
connect to external audio acquisition (e.g. MIC) for sound acquisition.
7. Audio Output Interface:
connect to audio player (e.g. active speaker) for sound broadcasting.
8. Analog Video Output Interface:
special for SD camera and engineering commissioning. After being installed and
connected, this interface can be used locally to connect with the image display device and adjust the camera angle to
the appropriate monitoring area according to the scene in the video.
1.6 Basic Procedure
1.
Unpack and check whether any component is missing.
2.
Connect the camera to computer by means of patch cable.
3.
If your computer IP is in a network section different from camera IP, please set it to the same network section as
camera IP, such as, 192.168.1.87.
4.
Log in the camera through client software or browser to check whether the video functions normally.
5.
Adjust the code stream and other video parameters.
6.
Modify the network parameters of camera and reboot the device.
7.
Repeat Step 3.
8.
Revisit the camera through client software or browser to check till the video functions normally.
9.
Install the camera and adjust the camera angle to the appropriate area.
10.
Visit the camera through client software or browse for video monitoring.
Summary of Contents for ZKSD3 Series
Page 20: ...3 Accessing Device 17 ...
Page 22: ...3 Accessing Device 19 ...
