background image

ZKS Group Company Limit 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ZKS Group Company Limited 

Address: No 552 Dong Zhou Road, Shanghai China 

TEL: +86-21-67679389 FAX: +86-21-67679336 

www.zksgroup.com 

14

input admin password 11111④. If shows failed, the lock may give• Di┈┈Di┈┈• , at 
this time, your fingerprint is failed to verify. 

⑥Press【1】button, if you hear ‡ Di┈┈Di┈┈• , then enter into Delete User condition. 
⑦Select ID number by value button, 【1】button means to add 1,【2】means to reduce 1,

【 】button to hear ‡ Di┈┈Di┈┈• .   

⑧The screen shows Success, while hear ‡ Di┈┈Di┈┈• , means you have deleted a user 

successfully. 

⑨After  delete  the  user,  please  wait  for  3  seconds,  the  system  will  exit  the  menu 

automatically. 

Remarks:  This  method  is  used  to  delete  a  certain  user  fingerprint,  card,  password 

information under certain ID number, but the user records are still saved in the 
lock.   

3.4.2 Delete All Users 

Please see the following steps:   

④Press down【2】button for 3 seconds, you will hear ‡ Di┈┈Di┈┈• , please release the 

button to enter into Delete status.   

⑤Input original admin password 111111 or identify your registered admin fingerprint, 

the screen show Success, while hear ‡ Di┈┈Di┈┈Di┈┈•  (press【 】after input original 
password 11111④. If screen shows failed, while hear ‡ Di┈┈Di┈┈• , means failed to 
identify fingerprint. 

⑥Press【0】button, if you hear ‡ Di┈┈Di┈┈• , then enter into Delete All Users condition. 
⑦Press【 】button for 3 seconds again, then release the button after you hear DiDi from 

the lock.   

⑧If  the  screen  shows  Success,  and  hear  ‡ Di┈┈Di┈┈• ,  means  all  users  have  deleted 
successfully. 
⑨After delete all users, please wait for 3 seconds, the system will exit automatically. 
Remarks: This method is used to delete all users fingerprint, card, password information 

that saved in the lock, but the users records are still saved in the lock. 

 

3.5 USB Download   

You can download all users IN records from the lock to U disk flash, please see the 

Summary of Contents for ZKS-G1





















Reviews: