MA300 User Manual
ZKTechnology EU
10
3. Device Operations
3.1 Management Card
3.1.1 Enroll a Management Card
To enroll a management card, proceed as follows:
1. The device automatically detects whether there exists a management
card.
2. If the device fails to detect the presence of a management card, it
enters the management card enrollment state. Then proceed with step 3;
otherwise the system generates the voice prompt “
: Verify users.
Please press your finger or punch your card”..
3. After the system generates the voice prompt “
: Please register the
management card”, you can swipe your card across the sensor area.
4. If enrollment fails, the system generates the voice prompt “
: The
card number is repeated” and returns to step 3; if enrollment succeeds,
the system generates the voice prompt “
: Registration is successful.
The system returns to verification state”.
Note:
The system returns to the verification state if any operation
in step 3 times out and only prompts you to enroll the management card
again after you restart the device again.
