Key Binding Settings (for Nintendo Switch):
1. After the connection is successful as described in previous connection method, connect the
original Nintendo Switch controller to the corresponding controller interface on the adapter.
At this time, the adapter LED turns to gold. Please note:
• must use the original Nintendo Switch controller. It does not support any other third-party
controllers;
• must use data cable to connect. It does not support the cable with charging function only;
• the controller must be closed before connecting;
2. After completing the connection , simultaneously press “F11 + F12” on the keyboard, and the
LED of the adapter turns blue.
3. Press and hold the button you want to set on the controller, then press the button on the keyboard
or mouse you want to bind, and then release the button on the controller. To set and bind the next
button, repeat the above steps;
4. Press “F11 + F12” again at the same time to complete the key binding settings.
5. Press and hold "F1 + F10 + F12" on the keyboard for 5 seconds to restore the default key
binding settings.
For example, if you want to bind the "B" button on the controller to the "T" key on you keyboard,
the steps are as follows:
• Press and hold “F11 + F12” on the keyboard, wait until the adapter LED is blue and then
release it;
• Press and hold the "B" button on the controller, do not let go;
• Press the "T" key on the keyboard, then release the "B" button on the controller;
• While holding down “F11 + F12” on the keyboard then release.
