31
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Figura 01
Presione la clavija con resorte
para unir los tubos de acero
hasta que se oiga un “clic”.
Conecte todos los tubos
adecuadamente.
Abroche el cambiador en los
rieles y asegúrese de que el
cambiador está estable. Abroche
el cambiador en los pasamanos y
asegúrese de que está estable.
Figura 02
Inserte los dos clips de plástico en
el orificio de la forma mostrada.
Coloque los dos clips en los rieles
laterales cortos del corralito.
Press the spring key to join the steel tubes
until a "click" is heard. Connect all tubes appropriately.
Buckle the changer onto the handrails and ensure
the changer is stabilized.
Insert the two plastic clips into the hole as the shown way.
place the two clips on the short side rails of the baby playpen.
CANOPY MOSQUITO
CHANGER AND STORAGE LAYER
Fit the 2 hooks as shown in the figure so that
the hood is correctly fitted.
Fix the hood at the back to the 2 press studs placed
at the 2 rear tubes.Pull the mosquito net to the opposite
part as shown to cover the corners.
Fig 1-2-3
Fig 1
Fig 2
Press the spring key to join the steel tubes
until a "click" is heard. Connect all tubes appropriately.
Buckle the changer onto the handrails and ensure
the changer is stabilized.
Insert the two plastic clips into the hole as the shown way.
place the two clips on the short side rails of the baby playpen.
CANOPY MOSQUITO
CHANGER AND STORAGE LAYER
Fit the 2 hooks as shown in the figure so that
the hood is correctly fitted.
Fix the hood at the back to the 2 press studs placed
at the 2 rear tubes.Pull the mosquito net to the opposite
part as shown to cover the corners.
Fig 1-2-3
Fig 1
Fig 2
22
1
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Cambiador y capa de almacenamiento
