Ziwell Wireless LAN Device Series ZWA-G120 User Manual Download Page 53

Page: 53 / 55

then the default gateway for all the DHCP client hosts will set to the IP
address of device.

Using CLI Menu

Start a SSH(Secure Shell) client session to login the device

The SSH server daemon inside device uses well-known TCP port 22.

User must use SSH client utility such like Putty to login the device. The

default password for user “root” is “qwert”, once user login the device

then can change the password by CLI command.

Execute CLI program

This program won’t execute automatically when user login the device.

User must manually execute it by typing the case-sensitive command

“cli”. Please note that any modified settings won’t save permanently

until user “Apply Changes to Flash” or reboot it. The new settings

modified by CLI will take effect after rebooting the device.

Menu Tree List

The System Management

Password Protection

Both Web-Browser and SSH configuration interfaces have password

protection.

Summary of Contents for Wireless LAN Device Series ZWA-G120
























































Search results

Summary of Contents for Wireless LAN Device Series ZWA-G120

Reviews:

Related manuals for Wireless LAN Device Series ZWA-G120

Brands by name

Popular brands

Ziwell Wireless LAN Device Series ZWA-G120, User Manual

Search results

Summary of Contents for Wireless LAN Device Series ZWA-G120

Reviews:

Related manuals for Wireless LAN Device Series ZWA-G120

Brands by name

Popular brands