4.2
Mechanical Interface
The Zivid One
+
camera has four M6 mounting holes and two Ø5 alignment holes. Use
the threaded holes on the bottom side of the device to mount it to a bracket. We
recommend using DIN 912 / ISO 4762 Hexagon or ISO 14579 Hexalobular socket head
cap screws in stainless steel (A2 or A4).
The camera must be completely still during the acquisition to deliver the spec-
ified 3D image quality. Otherwise, it is completely safe to move it, e.g. when
mounted on a robot or any other moving platform.
Note
Rev 1.3 - 11/2021
8
Zivid.com
